{"id":1187,"date":"2026-08-12T05:18:17","date_gmt":"2026-08-12T05:18:17","guid":{"rendered":"https:\/\/isbmblowmolding.com\/?post_type=product&p=1187"},"modified":"2026-08-12T05:55:10","modified_gmt":"2026-08-12T05:55:10","slug":"pharmaceutical-medicine-bottle-isbm-blow-molding-machine","status":"publish","type":"product","link":"https:\/\/isbmblowmolding.com\/ary\/product\/pharmaceutical-medicine-bottle-isbm-blow-molding-machine\/","title":{"rendered":"Pharmaceutical & Medicine Bottle ISBM Blow Molding Machine"},"content":{"rendered":"

<\/p>\n

\n

<\/p>\n

\n

<\/p>\n

ISBM Single-Stage<\/span>
\nMedical-Grade PET \/ PP<\/span>
\nGMP Compatible<\/span>
\n9 Model Configurations<\/span><\/div>\n

<\/p>\n

\n
\n
Pharmaceutical Bottle Production \u00b7 500 ml \u2013 1,500 ml \u00b7 2 to 6 Cavities<\/div>\n

Medicine Bottle Series
\nBlow Molding Machine<\/h2>\n

Nine models covering 2- to 6-cavity pharmaceutical bottle production. Neck diameters from 18\u201338 mm to 98 mm, output up to 7,200 bph. Medical-grade PET and PP, closed single-stage ISBM process \u2014 built for GMP-compatible pharmaceutical packaging environments.<\/p>\n

<\/p>\n

\n
\n

7,200<\/p>\n

BPH Max Output<\/p>\n<\/div>\n

\n

9<\/p>\n

Model Configs<\/p>\n<\/div>\n

\n

\u00b11\u00b0C<\/p>\n

Temp. Control Accuracy<\/p>\n<\/div>\n

\n

40%<\/p>\n

Energy vs 2-Stage<\/p>\n<\/div>\n<\/div>\n<\/div>\n

\"Medicine<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n

<\/p>\n

\n

Why Pharmaceutical Bottle Production Needs a Different Machine \u2014 Not Just Any ISBM Setup<\/h2>\n

Look, most ISBM machines are sold on output numbers \u2014 bottles per hour, cavities, max volume. That’s fine for water bottles and cosmetic containers. But for pharmaceutical packaging, the spec sheet questions that actually matter are a bit different: Can it hold \u00b11\u00b0C temperature control? Does the closed-mold cycle keep the interior surface of the bottle contamination-free without a secondary cleaning step? Does the neck finish accuracy meet the tolerances your child-resistant cap supplier specifies?<\/p>\n

This series is purpose-configured for pharmaceutical bottle production \u2014 tablet bottles, liquid medication bottles, vitamin supplement containers, oral rehydration solution bottles, vitamin and supplement pill jars, and clinical reagent bottles. The nine models cover 2 to 6 cavities, output from 1,800 bph (2-cavity specialty) to 7,200 bph (6-cavity high-volume), and container volumes from 500 ml to 1,500 ml.<\/p>\n

The single-stage ISBM process keeps the container’s inner surface in a closed environment from preform injection through to finished bottle ejection \u2014 no intermediate storage, no second-stage reheat, no handling between production steps. In pharmaceutical GMP terms, that means fewer contamination risk points to validate and document.<\/p>\n<\/div>\n

<\/p>\n

\n
\n

Regulatory Context<\/p>\n

Pharmaceutical primary packaging (direct drug contact) must meet:<\/p>\n

    \n
  • FDA 21 CFR 211 (cGMP for finished pharmaceuticals)<\/li>\n
  • EU GMP Annex 1 (sterile medicinal products)<\/li>\n
  • ISO 15378 (primary packaging materials for medicinal products)<\/li>\n
  • ICH Q3D (elemental impurity guidelines for container leaching)<\/li>\n<\/ul>\n

    The ISBM closed-single-stage process directly addresses contamination control requirements under all four frameworks.<\/p>\n<\/div>\n

    <\/p>\n

    \"Pharmaceutical<\/div>\n<\/div>\n<\/div>\n<\/div>\n

    <\/p>\n

    \n
    \n

    Complete Technical Specifications \u2014 All 9 Medicine Bottle Models<\/h2>\n

    HGA.AS-2C114.3 \u00b7 HGA.AS-4C76.2 \u00b7 HGA.ES-2C100 \u00b7 HGA.ES-2C114.3 \u00b7 HGA.ES-2C130 \u00b7 HGA.ES-3C76 \u00b7 HGA.ES-4C76 \u00b7 HGA.ES-4C100 \u00b7 HGA.ES-6C76<\/p>\n

    \n\n\n\n<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    Parameter<\/th>\nUnit<\/th>\nAS-2C114.3<\/th>\nAS-4C76.2<\/th>\nES-2C100<\/th>\nES-2C114.3<\/th>\nES-2C130<\/th>\nES-3C76<\/th>\nES-4C76<\/th>\nES-4C100<\/th>\nES-6C76<\/th>\n<\/tr>\n<\/thead>\n
    MOLDING GROUP<\/td>\n<\/tr>\n
    Clamping Stroke<\/td>\nmm<\/td>\n122<\/td>\n100<\/td>\n110<\/td>\n132<\/td>\n160<\/td>\n100<\/td>\n100<\/td>\n128<\/td>\n100<\/td>\n<\/tr>\n
    Mold-Open Distance<\/td>\nmm<\/td>\n302<\/td>\n280<\/td>\n280<\/td>\n312<\/td>\n360<\/td>\n300<\/td>\n300<\/td>\n328<\/td>\n300<\/td>\n<\/tr>\n
    Mold-Close Distance<\/td>\nmm<\/td>\n180<\/td>\n180<\/td>\n170<\/td>\n180<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n<\/tr>\n
    Stretching Stroke<\/td>\nmm<\/td>\n400<\/td>\n350<\/td>\n350<\/td>\n400<\/td>\n350<\/td>\n240<\/td>\n350<\/td>\n350<\/td>\n350<\/td>\n<\/tr>\n
    Bottle Mold-Close Dist.<\/td>\nmm<\/td>\n114.3<\/td>\n76.2<\/td>\n100<\/td>\n114.3<\/td>\n130<\/td>\n76<\/td>\n76<\/td>\n100<\/td>\n76<\/td>\n<\/tr>\n
    Preform Holder<\/td>\n\u2014<\/td>\n48<\/td>\n96<\/td>\n60<\/td>\n60<\/td>\n60<\/td>\n72<\/td>\n96<\/td>\n92<\/td>\n130<\/td>\n<\/tr>\n
    Cavities<\/td>\n\u2014<\/td>\n2<\/td>\n4<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n3<\/td>\n4<\/td>\n4<\/td>\n6<\/td>\n<\/tr>\n

    <\/p>\n

    Container Specifications<\/td>\n<\/tr>\n
    Max. Container Volume<\/td>\nml<\/td>\n1,000<\/td>\n500<\/td>\n500<\/td>\n1,000<\/td>\n1,500<\/td>\n700<\/td>\n700<\/td>\n800<\/td>\n700<\/td>\n<\/tr>\n
    Max. Neck Diameter<\/td>\nmm<\/td>\n88<\/td>\n48<\/td>\n68<\/td>\n88<\/td>\n98<\/td>\n18\u201338<\/td>\n48<\/td>\n68<\/td>\n38<\/td>\n<\/tr>\n
    Max. Container Diameter<\/td>\nmm<\/td>\n94<\/td>\n65<\/td>\n80<\/td>\n94<\/td>\n110<\/td>\n68<\/td>\n68<\/td>\n80<\/td>\n68<\/td>\n<\/tr>\n
    Max. Container Height<\/td>\nmm<\/td>\n260<\/td>\n250<\/td>\n200<\/td>\n260<\/td>\n250<\/td>\n240<\/td>\n240<\/td>\n250<\/td>\n240<\/td>\n<\/tr>\n
    Theoretical Output<\/td>\nbph<\/td>\n2,000<\/td>\n4,000<\/td>\n2,400<\/td>\n2,000<\/td>\n1,800<\/td>\n3,000<\/td>\n4,800<\/td>\n4,600<\/td>\n7,200<\/td>\n<\/tr>\n

    <\/p>\n

    Electrical System<\/td>\n<\/tr>\n
    Max. Heating Power<\/td>\nkW<\/td>\n45<\/td>\n33<\/td>\n34<\/td>\n50<\/td>\n42.5<\/td>\n40<\/td>\n40<\/td>\n62.5<\/td>\n62.5<\/td>\n<\/tr>\n
    Normal Heating Power<\/td>\nkW<\/td>\n20<\/td>\n17<\/td>\n8-12<\/td>\n16<\/td>\n8\u201313<\/td>\n18<\/td>\n18<\/td>\n21<\/td>\n26<\/td>\n<\/tr>\n

    <\/p>\n

    Air System<\/td>\n<\/tr>\n
    Operating Pressure<\/td>\nkg\/cm\u00b2<\/td>\n7 (all models)<\/td>\n<\/tr>\n
    Blowing Pressure<\/td>\nkg\/cm\u00b2<\/td>\n35<\/td>\n35<\/td>\n26\u201335<\/td>\n35<\/td>\n26\u201335<\/td>\n35<\/td>\n35<\/td>\n35<\/td>\n35<\/td>\n<\/tr>\n
    High-Pressure Air<\/td>\nltr\/min<\/td>\n1,600<\/td>\n4,000<\/td>\n1,000\u20131,400<\/td>\n1,000<\/td>\n1,000\u20131,500<\/td>\n2,400<\/td>\n3,900<\/td>\n4,000<\/td>\n5,800<\/td>\n<\/tr>\n

    <\/p>\n

    Cooling Water<\/td>\n<\/tr>\n
    Operating Pressure<\/td>\nkg\/cm\u00b2<\/td>\n6<\/td>\n5\u20136<\/td>\n5\u20136<\/td>\n6<\/td>\n5\u20136<\/td>\n5\u20136<\/td>\n5\u20136<\/td>\n5\u20136<\/td>\n5\u20136<\/td>\n<\/tr>\n
    Temperature<\/td>\n\u00b0C<\/td>\n8-12<\/td>\n8\u201310<\/td>\n8\u201310<\/td>\n8-12<\/td>\n8\u201310<\/td>\n8-12<\/td>\n8-12<\/td>\n8-12<\/td>\n8-12<\/td>\n<\/tr>\n
    Flow Rate<\/td>\nltr\/min<\/td>\n30<\/td>\n40<\/td>\n30<\/td>\n30<\/td>\n30<\/td>\n30<\/td>\n30<\/td>\n30<\/td>\n40<\/td>\n<\/tr>\n

    <\/p>\n

    Machine Dimensions<\/td>\n<\/tr>\n
    Size (L\u00d7W\u00d7H)<\/td>\nmm<\/td>\n2660\u00d71660\u00d72150<\/td>\n3370\u00d71850\u00d72100<\/td>\n2900\u00d71525\u00d71930<\/td>\n3220\u00d71660\u00d72010<\/td>\n3600\u00d71800\u00d71980<\/td>\n2850\u00d71850\u00d72180<\/td>\n3290\u00d71850\u00d72260<\/td>\n4170\u00d71930\u00d72340<\/td>\n4690\u00d72000\u00d72000<\/td>\n<\/tr>\n
    Machine Weight<\/td>\nkg<\/td>\n2,600<\/td>\n4,000<\/td>\n2,000<\/td>\n3,000<\/td>\n3,000<\/td>\n3,500<\/td>\n3,500<\/td>\n4,000<\/td>\n5,500<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

    Low-pressure air: 600\u2013900 ltr\/min across series \u00b7 All models 7 kg\/cm\u00b2 operating air pressure<\/p>\n<\/div>\n<\/div>\n

    <\/p>\n

    \n
    \n

    Five Things That Separate a Pharmaceutical Bottle Blow Molding Machine from a General-Purpose ISBM Setup<\/h2>\n

    GMP-compatible pharmaceutical bottle ISBM machine \u00b7 medicine bottle production \u00b7 tablet bottle blow molding machine \u00b7 oral liquid container production \u00b7 sterile pharmaceutical packaging equipment<\/p>\n

    \n
    \n
    CRITICAL<\/div>\n

    01<\/p>\n

    Closed-Cycle Contamination Control \u2014 the Biggest Difference from Two-Stage<\/p>\n

    In a two-stage SBM process, preforms are exposed to the factory environment during storage and handling between injection and blow stages. For food containers, that’s manageable. For pharmaceutical primary packaging, every exposure is a contamination risk that needs to be validated and documented in your GMP quality system. The single-stage ISBM cycle eliminates that intermediate exposure \u2014 from PET granule to finished medicine bottle, the internal surface of the container is never exposed to uncontrolled air. That’s the foundational pharmaceutical compliance advantage of ISBM, and it’s why regulatory frameworks like EU GMP Annex 1 and FDA 21 CFR 211 favour closed-process manufacturing.<\/p>\n<\/div>\n

    \n

    02<\/p>\n

    Neck Finish Tolerance \u2014 the Spec That Determines Child-Resistant Cap Compatibility<\/p>\n

    Pharmaceutical bottles need neck finishes accurate enough to work reliably with child-resistant closures (CRCs) and tamper-evident caps. These closure systems are tested to ASTM D3475 (US) or ISO 8317 (international) standards, and the thread profile, OD, and finish diameter of the bottle neck must stay within tight tolerances for the cap to function as designed. ISBM produces neck dimensions by injection molding \u2014 not blow molding \u2014 so the neck geometry comes out of an injection mold with tolerances typically better than \u00b10.2 mm. That’s what CRC cap suppliers specify. EBM can’t reliably hit those tolerances on medical-grade applications.<\/p>\n<\/div>\n

    \n

    03<\/p>\n

    6-Cavity ES-6C76 at 7,200 BPH \u2014 the High-Volume Option for Generic Drug Manufacturers<\/p>\n

    The HGA.ES-6C76 runs 6 cavities at up to 7,200 bottles per hour on containers up to 700 ml \u2014 that’s competitive with two-stage high-speed SBM lines for small pharmaceutical bottle formats (30\u2013500 ml tablet bottles, cough syrup bottles, vitamin supplement containers). At 62.5 kW installed power and 26 kW normal operating power, the per-bottle energy consumption is significantly lower than a two-stage line of equivalent throughput. For generic drug manufacturers who need high-volume pill bottle production with GMP documentation traceability, this is the spec to look at.<\/p>\n<\/div>\n

    \n

    04<\/p>\n

    Medical-Grade PP Option for Chemical-Resistant Liquid Medication Bottles<\/p>\n

    PET handles most tablet and dry-fill pharmaceutical bottles well \u2014 it’s clear, lightweight, and carries good moisture barrier properties. But liquid medications, particularly solutions containing ethanol, strong acids, or oil-based formulations, can interact with PET in ways that affect leachables compliance. Medical-grade PP (polypropylene) has broader chemical compatibility across pharmaceutical formulations and is the preferred material for oral suspension bottles, syrup bottles, and certain topical medication containers. The machine series runs both materials \u2014 material selection is a mold and process parameter decision, not a machine purchase decision.<\/p>\n<\/div>\n

    \n

    05<\/p>\n

    Production Traceability \u2014 Because Pharma Regulators Will Ask About It<\/p>\n

    GMP requires batch records for primary packaging production. The machine’s control system logs key process parameters \u2014 injection temperature, blow pressure, cycle time, preform temperature \u2014 which can be exported and linked to your batch documentation system. This isn’t optional for pharmaceutical applications; it’s the baseline requirement for a supplier audit or FDA\/MHRA inspection of your packaging manufacturing process. If your current bottle supplier can’t give you production parameter data for each batch, that’s a compliance gap. ISBM in-house gives you direct control over that data.<\/p>\n<\/div>\n

    \n

    06<\/p>\n

    Biaxial Orientation Improves Clarity and Drop Resistance \u2014 Relevant for Child-Safe Dispensing<\/p>\n

    The stretch-blow process in ISBM biaxially orients the PET molecular chains during forming. This produces a bottle with 30\u201350% higher impact strength compared to non-oriented PET and significantly better optical clarity. For amber-tinted pharmaceutical bottles (UV-protection formulations), this means thinner wall sections are possible while maintaining structural integrity \u2014 reducing material cost per bottle. For clear pharmaceutical bottles on retail pharmacy shelves, it means the product clarity is closer to glass than anything EBM can produce.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

    <\/p>\n

    \n
    \n

    What Pharmaceutical Containers Does This Machine Series Actually Produce?<\/h2>\n

    tablet bottle blow molding machine \u00b7 pharmaceutical liquid bottle production \u00b7 vitamin supplement bottle ISBM \u00b7 oral medication container manufacturing \u00b7 clinical reagent bottle machine<\/p>\n

    \n

    <\/p>\n

    \n
    \n
    \n

    Solid Dose \/ Tablet Bottles<\/p>\n

    Standard pharmacy tablet bottles (100 ml, 200 ml, 500 ml), child-resistant cap prescription bottles, vitamin and mineral supplement containers (60\u20131,000 tablet count), OTC pain relief packaging, veterinary tablet containers.<\/p>\n<\/div>\n

    \n

    Liquid Medication Bottles<\/p>\n

    Cough syrup and antitussive bottles (100\u2013500 ml, PP for alcohol-containing formulations), oral rehydration solution containers, paediatric liquid medication bottles, antacid suspension bottles, mouthwash and gargle bottles.<\/p>\n<\/div>\n

    \n

    Nutraceuticals & Health Supplements<\/p>\n

    Omega-3 and fish oil soft gel capsule bottles (high-clarity PET), probiotic supplement containers (moisture barrier critical), protein powder single-serve containers, collagen and beauty supplement pill jars, sports nutrition bottles.<\/p>\n<\/div>\n

    \n

    Clinical & Diagnostic<\/p>\n

    Reagent and diagnostic sample bottles (laboratory use, high clarity), specimen collection containers, disinfectant and antiseptic solution bottles, sterile saline containers (hospital and clinical use), contact lens solution bottles.<\/p>\n<\/div>\n

    \n

    Veterinary Pharmaceuticals<\/p>\n

    Animal medication bottles (tablets and liquids), livestock supplement containers, veterinary antiseptic bottles, pet health supplement packaging \u2014 same GMP container standards apply in regulated veterinary markets.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

    \"Medicine

    Medicine bottle outputs from this machine series<\/p><\/div>\n

    \n
    \n

    The Questions Pharmaceutical Packaging Buyers Ask (and Straight Answers to Each)<\/h2>\n

    medicine bottle blow molding machine buyer FAQ \u00b7 GMP pharmaceutical ISBM machine questions \u00b7 PET PP pharmaceutical bottle production guide<\/p>\n

    \n
    \n

    GMP Compliance<\/p>\n

    Is this machine GMP-certified? Will it pass an FDA or EMA inspection?<\/p>\n

    The machine itself is CE and ISO certified. GMP certification applies to a manufacturing facility and process \u2014 not to a machine in isolation. What we can tell you is: the closed single-stage ISBM cycle, combined with pharmaceutical-grade material use and process parameter logging, is fully compatible with the requirements of EU GMP, FDA 21 CFR 211, and ISO 15378. Whether your facility passes inspection depends on your entire quality system \u2014 SOPs, change control, batch records, environmental monitoring \u2014 not just the machine. We can provide the technical documentation needed for your Machine Qualification (IQ\/OQ\/PQ) process.<\/p>\n<\/div>\n

    \n

    Material Safety<\/p>\n

    What grades of PET and PP are acceptable for direct drug contact, and can you supply material certificates?<\/p>\n

    For pharmaceutical primary packaging, you need PET or PP resin that meets USP Class VI or ISO 10993 biocompatibility standards, with Certificate of Analysis (CoA) and Drug Master File (DMF) support from the resin supplier. We don’t supply resin, but we can recommend resin grades from established suppliers (such as Eastman, BASF, LyondellBasell) whose pharma-grade materials have established regulatory track records. The resin selection decision is ultimately yours and your QA team’s \u2014 it’s not something the machine manufacturer can make on your behalf.<\/p>\n<\/div>\n

    \n

    Child-Resistant Packaging<\/p>\n

    Can this machine produce bottles compatible with child-resistant closure (CRC) systems?<\/p>\n

    Yes \u2014 the injection-molded neck finish from ISBM is accurate enough to work with CRC caps. The key is mold design: your injection mold needs to produce the thread profile and finish diameter that your CRC cap supplier specifies (typically based on a standard neck finish like 28-400, 33-400, or a proprietary profile). We handle that in the mold design stage and can coordinate with your closure supplier to confirm compatibility before mold manufacturing starts. CRC testing to ASTM D3475 or ISO 8317 is done on finished bottles \u2014 we can supply samples for closure compatibility testing before production sign-off.<\/p>\n<\/div>\n

    \n

    UV-Protected Bottles<\/p>\n

    Can the machine produce amber or coloured pharmaceutical bottles for light-sensitive medications?<\/p>\n

    Yes. UV-protective amber colouration is achieved by adding a pharma-grade amber masterbatch to the PET or PP resin. The masterbatch must comply with food\/pharma contact regulations and be free from substances of concern (heavy metals, restricted colorants). Amber PET pharmaceutical bottles produced by ISBM typically achieve UV transmittance below 1% at 290\u2013450 nm, which meets EP\/USP requirements for Type III glass amber equivalent protection. The formulation of the masterbatch and testing against pharmacopoeia light-protection specs is something you do with your resin\/masterbatch supplier \u2014 not with us.<\/p>\n<\/div>\n

    \n

    Multi-SKU Production<\/p>\n

    We have 8 different tablet bottle formats. Can one machine handle all of them?<\/p>\n

    If your 8 formats fall within the volume and neck diameter range of a single model (e.g., all under 700 ml with 48 mm neck \u2014 handled by the ES-4C76), then yes, one machine with 8 mold sets covers them. Changeover time is 2\u20134 hours per mold set swap on a 4-cavity model. If your formats span a wide volume range (e.g., 100 ml to 1,500 ml), you might need two models to cover the full range without mold-parameter compromises. That’s a conversation worth having before you commit to a machine spec \u2014 send us your bottle list and we’ll map it to the right model configuration.<\/p>\n<\/div>\n

    \n

    Cleanroom Integration<\/p>\n

    Can the machine be installed in a cleanroom or GMP production area?<\/p>\n

    The machine can operate in a controlled pharmaceutical production environment. Standard installation requires normal factory conditions (16\u201330\u00b0C ambient, standard 3-phase power, compressed air and chilled water utilities). For ISO 7 or ISO 8 cleanroom installation, the main considerations are: machine surface materials (304 stainless steel and anodised aluminium panels are standard), exhaust and particulate management (the machine generates some hydraulic heat and minimal particulate from mechanical components), and cleaning protocol compatibility. We can discuss cleanroom-specific installation requirements and any modifications needed during the project specification stage.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

    <\/p>\n

    \n
    \n

    Medicine Bottle Series \u00b7 ISBM Blow Molding Machine \u00b7 9 Configurations<\/p>\n

    Tell Us Your Bottle Specs, Volume Range, and GMP Requirements \u2014
    \nWe’ll Recommend the Right Configuration and Send a Quote<\/h2>\n

    Nine models, 2 to 6 cavities, up to 7,200 bph. Whether you’re setting up a new tablet bottle line, scaling up liquid medication production, or switching from a bought-in bottle supply to in-house manufacturing \u2014 let’s work through the numbers together.<\/p>\n

    Request a Quote<\/a>
    \n    Send Your Bottle Specs<\/a><\/div>\n

    <\/p>\n

    \n
    \n

    9 Models<\/p>\n

    2 to 6 cavity options<\/p>\n<\/div>\n

    \n

    GMP Compatible<\/p>\n

    IQ\/OQ\/PQ documentation<\/p>\n<\/div>\n

    \n

    Custom Mold Design<\/p>\n

    CRC-compatible neck finishes<\/p>\n<\/div>\n

    \n

    24h Response<\/p>\n

    Quote with full specs<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

    <\/p>","protected":false},"excerpt":{"rendered":"

    One-step ISBM blow molding machine for pharmaceutical and medicine bottles, supporting medical-grade PET and PP with 2\u20136 cavities and output up to 7,200 BPH<\/p>","protected":false},"featured_media":1186,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[142],"product_tag":[],"class_list":["post-1187","product","type-product","status-publish","has-post-thumbnail","product_cat-isbm-machines-by-application","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/isbmblowmolding.com\/ary\/wp-json\/wp\/v2\/product\/1187","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/isbmblowmolding.com\/ary\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/isbmblowmolding.com\/ary\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/isbmblowmolding.com\/ary\/wp-json\/wp\/v2\/media\/1186"}],"wp:attachment":[{"href":"https:\/\/isbmblowmolding.com\/ary\/wp-json\/wp\/v2\/media?parent=1187"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/isbmblowmolding.com\/ary\/wp-json\/wp\/v2\/product_brand?post=1187"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/isbmblowmolding.com\/ary\/wp-json\/wp\/v2\/product_cat?post=1187"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/isbmblowmolding.com\/ary\/wp-json\/wp\/v2\/product_tag?post=1187"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}