{"id":807,"date":"2026-07-15T07:41:07","date_gmt":"2026-07-15T07:41:07","guid":{"rendered":"https:\/\/isbmblowmolding.com\/?p=807"},"modified":"2026-07-15T07:44:05","modified_gmt":"2026-07-15T07:44:05","slug":"tablet-bottle-supplement-packaging-blow-molding-machine","status":"publish","type":"post","link":"https:\/\/isbmblowmolding.com\/fa\/application\/tablet-bottle-supplement-packaging-blow-molding-machine\/","title":{"rendered":"Three-Station ISBM Machine for Tablet Bottles & Health Supplement Packaging"},"content":{"rendered":"
\n

<\/p>\n

\n

Industry Application Series \u2014 Pharmaceutical & Medical Packaging<\/p>\n<\/div>\n

Three-Station Blow Molding Machine for Tablet Bottles & Health Supplement Packaging: High-Volume PET Container Production<\/h2>\n

Tablet bottles and health supplement containers represent one of the highest-volume, most demanding segments in rigid plastic packaging. Walk into any pharmacy, health food retailer, or hospital dispensary across Australia, the United Kingdom, or the Netherlands and the shelves are dense with PET and PETG bottles holding vitamins, minerals, prescription tablets, capsules, and nutraceuticals. Behind each of those bottles is a production process that must simultaneously deliver dimensional consistency across millions of units, regulatory compliance for primary drug packaging, adequate moisture barrier performance to maintain tablet shelf life, and competitive per-unit cost for an intensely price-sensitive market.<\/p>\n

The Three-Station ISBM Machine<\/a> \u2014 specifically the HGY50-V3-EV from AUS isbmblowmolding Co., Ltd \u2014 is increasingly the production platform of choice for manufacturers and contract packaging organisations (CPOs) in this sector. This article details why the three-station one-step process is particularly well-matched to tablet and supplement bottle production, and what specification decisions manufacturers must address.<\/p>\n

\"\u0628\u0637\u0631\u06cc\u200c\u0647\u0627\u06cc<\/p>\n

<\/p>\n

The Tablet & Supplement Bottle Market: What Makes It Technically Distinctive<\/h2>\n

Supplement and tablet bottles are structurally different from beverage bottles or cosmetic containers in several important ways that directly affect production machine requirements. First, most solid-dose supplement bottles are wide-mouth containers \u2014 typically 38 mm to 63 mm neck finish \u2014 compared to the narrow necks of beverage bottles. This means the mould design and blow-up ratio calculation must accommodate a significantly larger opening relative to the bottle body diameter.<\/p>\n

Second, tablet bottles are almost universally paired with child-resistant closures (CRC) or continuous-thread push-and-turn caps. Both closure types require a dimensionally exact neck finish with thread pitch and depth controlled to within 0.1 mm to achieve the torque and engagement specifications required by EN 28317 (Europe) and 16 CFR Part 1700 (USA). An imprecise neck finish produced by inconsistent injection moulding will cause closure torque failures \u2014 either the cap is too difficult to remove for elderly patients, or it fails to lock properly, becoming a regulatory compliance failure.<\/p>\n

Third, the moisture barrier requirement for tablet packaging is considerably more stringent than for most other bottle applications. Tablets and capsules are highly hygroscopic \u2014 even brief moisture exposure during production can degrade product quality. This means PET’s inherently low water vapour transmission rate (WVTR) is a core material selection driver, and the production process must not introduce moisture through reheating cycles, transit steps, or extended preform storage.<\/p>\n

<\/p>\n

How the Three-Station One-Step Process Addresses These Requirements<\/h2>\n

The HGY50-V3-EV’s three-station architecture \u2014 Injection \u2192 Stretch Blow \u2192 Ejection \u2014 delivers specific technical advantages that map directly onto the distinctive requirements of tablet and supplement bottle production.<\/p>\n

Precision Neck Finish on Wide-Mouth Bottles<\/h3>\n

Because the bottle neck is formed entirely during the injection stage and never re-enters a mould cavity during the blow stage, the neck finish dimensions are set with injection-moulding precision \u2014 essentially as accurate as a dedicated injection-moulded part. The 50 KN injection clamping force and NSK Japan lead screw configuration of the HGY50-V3-EV maintain consistent mould closure pressure throughout each cycle, preventing the flash and dimensional variation that occurs in lower-clamping-force machines. For wide-mouth tablet bottles requiring precise closure torque performance, this injection-stage neck precision is a fundamental process advantage over extrusion blow moulding, which typically produces necks with higher dimensional variation.<\/p>\n

Moisture-Free Production Path<\/h3>\n

In a two-stage ISBM or RSBM process, preforms are stored and transported between production stages \u2014 during which time they can absorb ambient moisture into the PET polymer matrix. When those preforms are then reheated for blowing, the absorbed moisture causes hydrolytic degradation of the PET chains, reducing intrinsic viscosity and compromising the final bottle’s mechanical performance and moisture barrier properties. For beverage bottles, this degradation is typically marginal. For tablet bottles where WVTR performance is a core quality specification, it is a meaningful risk.<\/p>\n

The one-step three-station process eliminates intermediate preform storage entirely. The preform moves from injection directly to the stretch-blow station with retained heat, never cooling to ambient temperature or being exposed to warehouse humidity. This maintains the PET polymer’s intrinsic viscosity at its as-moulded level, delivering the best possible moisture barrier performance from a given resin grade \u2014 without requiring a higher-IV resin or a secondary barrier treatment.<\/p>\n

Consistent Bottle-to-Bottle Uniformity Across Long Production Runs<\/h3>\n

Supplement manufacturers and CPOs running dedicated packaging lines for high-volume SKUs \u2014 500-count vitamin C tablets, 90-capsule omega-3 containers \u2014 require consistent bottle dimensions to maintain line efficiency on automated filling and counting equipment. A bottle with variable body diameter or out-of-specification height will cause jams and stoppages on rotary filling machines, with significant production efficiency costs.<\/p>\n

The five servo-system configuration of the HGY50-V3-EV, with its Japan Yaskawa or WEICHI servo motor on the turntable and Taiwan TSUNTIEN reducer, delivers cycle-to-cycle repeatability that maintains dimensional consistency across multi-hour production runs without drift. The dual servo motor mould-clamping system with high-pressure compensation actively corrects for mould wear and thermal expansion over time, maintaining consistent clamping force regardless of how long the machine has been running.<\/p>\n

<\/p>\n

Typical Bottle Specifications for Tablet & Supplement Packaging<\/h2>\n

<\/p>\n

\n\n\n\n\n\n\n\n\n
Bottle Type<\/th>\nTypical Volume<\/th>\nNeck Finish<\/th>\nMaterial<\/th>\nClosure Type<\/th>\n<\/tr>\n<\/thead>\n
Tablet Bottle (small)<\/td>\n60 \u2013 150 ml<\/td>\n38 mm<\/td>\nPET<\/td>\nCRC push-and-turn<\/td>\n<\/tr>\n
Tablet Bottle (standard)<\/td>\n150 \u2013 400 ml<\/td>\n45 \u2013 53 mm<\/td>\n\u067e\u062a \/ \u067e\u062a\u06af<\/td>\nCRC or CT cap<\/td>\n<\/tr>\n
Capsule \/ Supplement Jar<\/td>\n250 \u2013 600 ml<\/td>\n53 \u2013 63 mm<\/td>\nPET<\/td>\nScrew-on flat cap<\/td>\n<\/tr>\n
Protein Powder Canister<\/td>\n500 \u2013 1,500 ml<\/td>\n63 \u2013 89 mm<\/td>\nPET<\/td>\nWide-mouth screw cap<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

All of the bottle types listed above fall within the production capability envelope of the HGY50-V3-EV, which supports bottles up to 2,500 ml in volume and neck diameters up to 90 mm, with a blowing clamping force of 315 KN sufficient for the larger jar and canister formats.<\/p>\n

<\/p>\n

Operational Cost Analysis: Three-Station ISBM vs. Two-Stage RSBM for Supplement Bottles<\/h2>\n

The total cost of ownership comparison between one-step three-station ISBM and two-stage RSBM for supplement bottle production is weighted heavily in favour of the one-step process for mid-scale manufacturers. Key factors include:<\/p>\n