{"id":1182,"date":"2026-08-12T03:41:43","date_gmt":"2026-08-12T03:41:43","guid":{"rendered":"https:\/\/isbmblowmolding.com\/?post_type=product&p=1182"},"modified":"2026-08-12T05:54:26","modified_gmt":"2026-08-12T05:54:26","slug":"edible-oil-handle-bottle-isbm-blow-molding-machine","status":"publish","type":"product","link":"https:\/\/isbmblowmolding.com\/id\/produk\/edible-oil-handle-bottle-isbm-blow-molding-machine\/","title":{"rendered":"Edible Oil & Handle Bottle ISBM Blow Molding Machine"},"content":{"rendered":"
\n

<\/p>\n

\n

<\/p>\n

\n

ISBM Blow Molding Machine \u00b7 Handle Bottle Series \u00b7 Edible Oil & Handled Containers \u00b7 7 Models<\/p>\n<\/div>\n

\n

<\/p>\n

\n

Blow Molding Machines for Oil Bottles and Handled Containers<\/h2>\n

“The machine that does the heavy lifting so your containers can hold it.”<\/p>\n

Seven model configurations. Single-stage ISBM process. Containers from 1,500 ml to 22,000 ml with integrated pre-inserted handles \u2014 covering edible oil bottles, cooking oil jugs, large water containers, detergent handled containers, and 20-litre bulk food-grade jerrycans.<\/p>\n

1,500 ml \u2192 22,000 ml<\/span>
\nUp to 1,800 BPH<\/span>
\nPre-inserted Handle Tech<\/span>
\nPET \/ PP \/ PETG<\/span><\/div>\n<\/div>\n

<\/p>\n

\"Edible<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n
\n

22,000 ml<\/p>\n

Max Container Volume<\/p>\n<\/div>\n

\n

1,800<\/p>\n

BPH Max Output<\/p>\n<\/div>\n

\n

138 mm<\/p>\n

Max Neck Diameter<\/p>\n<\/div>\n

\n

7<\/p>\n

Model Configurations<\/p>\n<\/div>\n

\n

40%<\/p>\n

Energy Saving vs 2-Stage<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n

What Makes an Oil Bottle Different \u2014 and Why the Handle Is the Tricky Bit<\/h2>\n

Right, so here’s the thing with edible oil bottles that trips up a lot of buyers: a 3-litre or 5-litre oil bottle isn’t just a big water bottle. It needs a handle \u2014 and that handle has to be mechanically bonded to the bottle body, not just clipped on after the fact. A loose clip-on handle on a 5-litre bottle of cooking oil is a lawsuit waiting to happen. Most standard ISBM machines can’t do this at all; they’re set up for straight-wall bottles without handle geometry.<\/p>\n

This series is specifically engineered for handled containers. The key technology here is pre-inserted handle blow molding<\/strong>: the handle is placed into the blow mold before blowing, and the PET bottle body is blown around it during the molding cycle. The result is a handle that’s structurally locked into the bottle \u2014 tested to carry the full weight of a filled container with a safety margin that meets food-contact packaging standards in most regulated markets.<\/p>\n

The seven models cover containers from 1,500 ml (HGA.ES-2C130) through to a 22,000 ml bulk jug (HGA.J-2C366). The mid-range FS and JS series handle the 5-litre and 3-litre edible oil formats that are the bread and butter of this segment, while the JS-2C200 and J-2C366 cover the 5-litre and 20-litre handled containers used for bulk cooking oil, large-format water dispensers, and industrial food-grade liquid storage.<\/p>\n

\n
\"PET<\/div>\n
\"Water<\/div>\n
\"Large<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n

Full Technical Specifications \u2014 All 7 Models, No Asterisks<\/h2>\n

HGA.ES-2C130 \u00b7 HGA.ES-2C150 \u00b7 HGA.ES-2C200 \u00b7 HGA.FS-2C200(5L) \u00b7 HGA.JS-2CB152 \u00b7 HGA.JS-2C200 \u00b7 HGA.J-2C366(20L)<\/p>\n

\n\n\n\n<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Parameter<\/th>\nSatuan<\/th>\nES-2C130<\/th>\nES-2C150<\/th>\nES-2C200<\/th>\nFS-2C200
\n(5L)<\/th>\n		JS-2CB152<\/th>\nJS-2C200<\/th>\nJ-2C366
\n(20L)<\/th>\n<\/tr>\n<\/thead>\n
MOLDING GROUP<\/td>\n<\/tr>\n
Clamping Stroke<\/td>\nmm<\/td>\n160<\/td>\n190<\/td>\n215<\/td>\n225<\/td>\n190<\/td>\n225<\/td>\n332<\/td>\n<\/tr>\n
Mold-Open Distance<\/td>\nmm<\/td>\n360<\/td>\n440<\/td>\n499<\/td>\n509<\/td>\n440<\/td>\n509<\/td>\n772<\/td>\n<\/tr>\n
Mold-Close Distance<\/td>\nmm<\/td>\n200<\/td>\n250<\/td>\n284<\/td>\n284<\/td>\n250<\/td>\n284<\/td>\n440<\/td>\n<\/tr>\n
Stretching Stroke<\/td>\nmm<\/td>\n350<\/td>\n450<\/td>\n500<\/td>\n500<\/td>\n450<\/td>\n450<\/td>\n620<\/td>\n<\/tr>\n
Bottle Mold-Close Dist.<\/td>\nmm<\/td>\n130<\/td>\n150<\/td>\n200<\/td>\n200<\/td>\n152<\/td>\n200\/63.4<\/td>\n366<\/td>\n<\/tr>\n
Preform Holder<\/td>\n\u2014<\/td>\n60<\/td>\n60<\/td>\n50<\/td>\n76<\/td>\nBlow\u00d710
\nHeat\u00d7128<\/td>\n		Blow\u00d78
\nHeat\u00d7128<\/td>\n		116<\/td>\n<\/tr>\n
Cavities<\/td>\n\u2014<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n<\/tr>\n

<\/p>\n

Container Specifications<\/td>\n<\/tr>\n
Max. Container Volume<\/td>\nml<\/td>\n1,500<\/td>\n2,500<\/td>\n5,000<\/td>\n5,000<\/td>\n3,000<\/td>\n5,000<\/td>\n22,000<\/td>\n<\/tr>\n
Max. Neck Diameter<\/td>\nmm<\/td>\n98<\/td>\n110<\/td>\n138<\/td>\n50<\/td>\n46<\/td>\n58<\/td>\n90<\/td>\n<\/tr>\n
Max. Container Diameter<\/td>\nmm<\/td>\n110<\/td>\n130<\/td>\n180<\/td>\n180<\/td>\n140<\/td>\n180<\/td>\n300<\/td>\n<\/tr>\n
Max. Container Height<\/td>\nmm<\/td>\n250<\/td>\n250<\/td>\n350<\/td>\n330<\/td>\n330<\/td>\n340<\/td>\n480<\/td>\n<\/tr>\n
Theoretical Output<\/td>\nbph<\/td>\n1,800<\/td>\n1,800<\/td>\n1,600<\/td>\n1,200<\/td>\n1,600<\/td>\n1,000<\/td>\n700<\/td>\n<\/tr>\n

<\/p>\n

Electrical System<\/td>\n<\/tr>\n
Max. Heating Power<\/td>\nkW<\/td>\n42.5<\/td>\n42.5<\/td>\n85<\/td>\n72<\/td>\n48<\/td>\n65<\/td>\n86<\/td>\n<\/tr>\n
Normal Heating Power<\/td>\nkW<\/td>\n8\u201313<\/td>\n18<\/td>\n35<\/td>\n24<\/td>\n12<\/td>\n26<\/td>\n45<\/td>\n<\/tr>\n

<\/p>\n

Air System<\/td>\n<\/tr>\n
Operating Pressure<\/td>\nkg\/cm\u00b2<\/td>\n7<\/td>\n7<\/td>\n7<\/td>\n7<\/td>\n7<\/td>\n7<\/td>\n7<\/td>\n<\/tr>\n
Blowing Pressure<\/td>\nkg\/cm\u00b2<\/td>\n26\u201335<\/td>\n26\u201335<\/td>\n30<\/td>\n35<\/td>\n35<\/td>\n35<\/td>\n35<\/td>\n<\/tr>\n
High-Pressure Air<\/td>\nltr\/min<\/td>\n1,000\u20131,500<\/td>\n1,000\u20131,500<\/td>\n6,000<\/td>\n3,600<\/td>\n2,800<\/td>\n5,000<\/td>\n12,500<\/td>\n<\/tr>\n

<\/p>\n

Cooling Water<\/td>\n<\/tr>\n
Operating Pressure<\/td>\nkg\/cm\u00b2<\/td>\n5\u20136<\/td>\n5\u20136<\/td>\n5\u20136<\/td>\n5\u20136<\/td>\n5\u20136<\/td>\n5\u20136<\/td>\n5\u20136<\/td>\n<\/tr>\n
Temperature Range<\/td>\n\u00b0C<\/td>\n8\u201310<\/td>\n8\u201310<\/td>\n8\u201312<\/td>\n8\u201312<\/td>\n8\u201312<\/td>\n8\u201312<\/td>\n8\u201312<\/td>\n<\/tr>\n
Flow Rate<\/td>\nltr\/min<\/td>\n30<\/td>\n30<\/td>\n91.4<\/td>\n60<\/td>\n30<\/td>\n30<\/td>\n120<\/td>\n<\/tr>\n

<\/p>\n

Machine Dimensions<\/td>\n<\/tr>\n
Ukuran (P\u00d7L\u00d7T)<\/td>\nmm<\/td>\n3600\u00d71800\u00d71980<\/td>\n4290\u00d71800\u00d72220<\/td>\n4300\u00d72100\u00d72500<\/td>\n3450\u00d72150\u00d72290<\/td>\n4200\u00d72100\u00d72260<\/td>\n4100\/4450\u00d72150\/
\n2750\u00d72350<\/td>\n		4090\u00d72660\u00d73040<\/td>\n<\/tr>\n
Berat Mesin<\/td>\nkg<\/td>\n3,000<\/td>\n3,500<\/td>\n4,500<\/td>\n3,500<\/td>\n3,000<\/td>\n2,500<\/td>\n7,000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Low-pressure air: 600\u20132,000 ltr\/min across series \u00b7 All models 5\u20136 kg\/cm\u00b2 cooling water pressure<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n

Why the Handle-Bottle ISBM Machine Is a Completely Different Beast from a Standard Blow Molding Setup<\/h2>\n

pre-inserted handle PET oil bottle machine \u00b7 edible oil container blow molding \u00b7 large handled water container production \u00b7 ISBM handle bottle technology<\/p>\n

\n
\n
\u25b6<\/div>\n
\n

Pre-inserted Handle Technology \u2014 Not a Clip-On Afterthought<\/p>\n

There are two ways to put a handle on a PET oil bottle. You can clip one on after blowing (cheap, but the handle can pull free under load), or you can blow the bottle around a pre-placed handle so the PET literally encapsulates the handle anchor points during the blow cycle. This series uses the second method. The handle ends up structurally bonded to the bottle body \u2014 pull tests on pre-inserted handle bottles typically show 3\u20135\u00d7 higher handle detachment force compared to post-inserted alternatives. For 3-litre and 5-litre cooking oil bottles, that’s not a nice-to-have; it’s a safety requirement that supermarket shelf buyers will check.<\/p>\n<\/div>\n<\/div>\n

\n
\u25b6<\/div>\n
\n

The JS-2CB152 Runs a 128-Position Heating Carousel with 10-Position Blowing \u2014 Here’s Why That Matters<\/p>\n

The HGA.JS-2CB152 uses an asymmetric thermal management system: 128 preform positions in the heating station versus 10 in the blow station. This isn’t a typo \u2014 it means the preforms spend significantly more time in temperature conditioning before they’re blown, which is critical for large-format handle bottles. Thick-walled preforms for 3-litre oil bottles take longer to heat evenly through their cross-section than a standard 500 ml water bottle preform. Rushing the heat cycle on thick preforms produces cold-stress zones in the shoulder and handle-anchor area, which is exactly where handle failure happens under load. The extended thermal cycle is the engineering fix for that problem.<\/p>\n<\/div>\n<\/div>\n

\n
\u25b6<\/div>\n
\n

Food-Grade PET Oil Bottles Are Replacing Glass \u2014 and the Numbers Back It Up<\/p>\n

A 5-litre glass oil bottle weighs roughly 700\u2013900 g empty. The PET equivalent on this machine weighs 80\u2013120 g. That’s an 85% weight reduction, which means: lower shipping cost per unit, lower breakage rate in transit, and easier handling in the kitchen. PET’s oxygen barrier for edible oils is adequate for 12\u201318 month shelf life when the container is properly sealed \u2014 which covers the vast majority of cooking oil SKUs. Markets that made the switch from glass to PET oil bottles (most of Southern Europe, much of Southeast Asia, growing fast in Australia and the Middle East) show no reversal trend. If you’re still bottling oil in glass because “that’s how it’s always been done,” this machine is the upgrade path.<\/p>\n<\/div>\n<\/div>\n

\n
\u25b6<\/div>\n
\n

22-Litre Handled Container Capability on the HGA.J-2C366 \u2014 for Bulk Food-Grade Liquid Storage<\/p>\n

The J-2C366 is the biggest model in the series, producing 22-litre containers with a 90 mm neck and 300 mm body diameter \u2014 this is the bulk cooking oil jug, 20-litre institutional water container, and large-format edible oil jerrycan format. At 700 bph on 2 cavities, it’s a specialty production machine, not a high-volume commodity line. But for manufacturers supplying food service, institutional catering, or bulk retail channels, it’s the only ISBM option in this class that produces a seamless, handle-bonded PET container at this volume without moving to extrusion blow molding (which would sacrifice the optical clarity and wall uniformity that PET ISBM delivers).<\/p>\n<\/div>\n<\/div>\n

\n
\u25b6<\/div>\n
\n

Single-Stage Process Keeps Food-Contact Compliance Simple<\/p>\n

Edible oil is a food product, which means your bottle manufacturer’s process needs to sit inside your food safety management system. With ISBM, the food-contact surface of every bottle goes from PET granule to finished container without any intermediate storage or handling step where environmental contamination could enter the picture. That closed-loop traceability is genuinely easier to document for FDA 21 CFR, EU food contact materials regulation 10\/2011, or Codex Alimentarius food packaging standards than a two-stage process where preforms are stored, transported, and fed into a separate machine.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\"Edible<\/p>\n

\n
\n

What Containers Does This Series Actually Produce? Here’s the Full List<\/h2>\n

edible oil bottle blow molding machine applications \u00b7 cooking oil container with handle \u00b7 handled water jug ISBM \u00b7 detergent bottle handle blow molding<\/p>\n

\n
\n
\n
\ud83e\uded8<\/span><\/div>\n

Edible Oil<\/p>\n<\/div>\n