{"id":1239,"date":"2026-08-12T07:18:50","date_gmt":"2026-08-12T07:18:50","guid":{"rendered":"https:\/\/isbmblowmolding.com\/?post_type=product&p=1239"},"modified":"2026-09-07T06:26:01","modified_gmt":"2026-09-07T06:26:01","slug":"isbm-blow-molding-machines-for-baby-pp-special-shaped-bottles","status":"publish","type":"product","link":"https:\/\/isbmblowmolding.com\/ms\/product\/isbm-blow-molding-machines-for-baby-pp-special-shaped-bottles\/","title":{"rendered":"ISBM Blow Molding Machines for Baby, PP & Special-Shaped Bottles"},"content":{"rendered":"

<\/p>\n

\n

<\/p>\n

\n

<\/p>\n

This Series Covers:<\/span>
\nBaby Bottles<\/span>
\nPP Bottles<\/span>
\nCraft & Decorative Bottles<\/span>
\nSpecial-Shaped Containers<\/span>
\n12 Model Configurations<\/span><\/div>\n
\n

<\/p>\n

\n

HGA.FS \/ HGA.P \/ HGA.ES \/ HGA.JS Series \u00b7 ISBM One-Step<\/p>\n

Blow Molding Machines for Baby Bottles, PP Bottles, Craft & Special-Shaped Containers<\/h1>\n

One platform, four container categories. From BPA-free PP feeding bottles and Tritan sippy cups to asymmetric craft flacons and wide-mouth decorative jars \u2014 the HGA series covers 700 ml to 15,000 ml across 12 model configurations.<\/p>\n

<\/p>\n

\n
\n

12<\/p>\n

Model configs<\/p>\n<\/div>\n

\n

2,800<\/p>\n

BPH peak output<\/p>\n<\/div>\n

\n

700ml\u201315L<\/p>\n

Volume range<\/p>\n<\/div>\n

\n

0% BPA<\/p>\n

Material-certified<\/p>\n<\/div>\n<\/div>\n

Request a Quote<\/a>
\nView Full Specs<\/a><\/div>\n<\/div>\n

<\/p>\n

\"Blow<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n

Why Baby Bottles and Craft Containers Are the Trickiest Bottles to Blow Mould \u2014 and Why This Series Handles Them Well<\/h2>\n

Most blow moulding machines are optimised for one thing: high output on a standard bottle shape. Shampoo bottles, water bottles, oil jugs \u2014 round cross-section, consistent wall, predictable material behaviour. That’s fine for commodity production. But baby bottles, craft flacons, and special-shaped containers are a completely different engineering challenge.<\/p>\n

Baby feeding bottles in PP or Tritan need to process at higher temperatures than PET (PP melts at around 160\u2013170\u00b0C, PPSU higher again), they often have wide necks that don’t stretch the same way a narrow beverage bottle does, and the finished container has to meet infant safety standards that most packaging isn’t tested against \u2014 no BPA, no heavy metal migration, no surface defects that could harbour bacteria.<\/p>\n

Craft and decorative bottles add a different layer of difficulty: faceted surfaces, embossed patterns, asymmetric profiles, flat or oval cross-sections. These shapes require very precise preform conditioning because any hot spot in the preform will blow out unevenly, ruining the surface detail the mould is designed to capture.<\/p>\n

The HGA.FS, HGA.P, HGA.ES, and HGA.JS models in this series address both problems directly \u2014 extended conditioning dwell time for thick-walled PP and PPSU preforms, and the thermal precision needed to reproduce complex surface geometry consistently across every cycle.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n
\n
\n

\"PP<\/p>\n

\n

PP & Baby Bottles<\/p>\n

PP \/ PPSU \/ Tritan \u00b7 BPA-Free<\/p>\n<\/div>\n<\/div>\n

\n

\"Craft<\/p>\n

\n

Craft & Decorative Bottles<\/p>\n

PETG \/ PC \/ Tritan \u00b7 Complex geometry<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/div>\n
\n
\n

\"PP<\/p>\n

\n

Sport & Water Bottles<\/p>\n

Tritan \/ PP \u00b7 Reusable formats<\/p>\n<\/div>\n<\/div>\n

\n

\"Special<\/p>\n

\n

Special-Shaped Containers<\/p>\n

Asymmetric \/ faceted \/ flat oval<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n

Complete Technical Specifications \u2014 All 12 Models<\/h2>\n

HGA.FS-1CG130 \u00b7 HGA.FS-1CG150 \u00b7 HGA.FS-1CG196 \u00b7 HGA.FS-1CG220 \u00b7 HGA.P.FS-2CB130(L) \u00b7 HGA.P.FS-2CB130 \u00b7 HGA.P.FS-2CG130(L) \u00b7 HGA.ES-2C150 \u00b7 HGA.P.FS-2C150(L) \u00b7 HGA.ES-2C200 \u00b7 HGA.ES-2C260 \u00b7 HGA.JS-4C114<\/p>\n

\n\n\n\n<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Parameter<\/th>\nFS-1CG130<\/th>\nFS-1CG150<\/th>\nFS-1CG196<\/th>\nFS-1CG220<\/th>\nP.FS-2CB130(L)<\/th>\nP.FS-2CB130<\/th>\nP.FS-2CG130(L)<\/th>\nES-2C150<\/th>\nP.FS-2C150(L)<\/th>\nES-2C200<\/th>\nES-2C260<\/th>\nJS-4C114<\/th>\n<\/tr>\n<\/thead>\n
Molding Group<\/td>\n<\/tr>\n
Clamping Stroke (mm)<\/td>\n150<\/td>\n200<\/td>\n225<\/td>\n225<\/td>\n160<\/td>\n150<\/td>\n150<\/td>\n190<\/td>\n190<\/td>\n215<\/td>\n275<\/td>\n132<\/td>\n<\/tr>\n
Mold-Open Distance (mm)<\/td>\n330<\/td>\n430<\/td>\n509<\/td>\n509<\/td>\n360<\/td>\n350<\/td>\n330<\/td>\n440<\/td>\n440<\/td>\n499<\/td>\n635<\/td>\n362<\/td>\n<\/tr>\n
Stretching Stroke (mm)<\/td>\n350<\/td>\n400<\/td>\n450<\/td>\n500<\/td>\n350<\/td>\n350<\/td>\n350<\/td>\n450<\/td>\n500<\/td>\n500<\/td>\n550<\/td>\n350<\/td>\n<\/tr>\n
Preform Holder<\/td>\n50<\/td>\n42<\/td>\n40<\/td>\n40<\/td>\n74<\/td>\n89<\/td>\n92<\/td>\n60<\/td>\n85<\/td>\n50<\/td>\n42<\/td>\n488<\/td>\n<\/tr>\n
Cavities<\/td>\n1<\/td>\n1<\/td>\n1<\/td>\n1<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n4<\/td>\n<\/tr>\n

<\/p>\n

Container Specifications<\/td>\n<\/tr>\n
Max. Container Volume (ml)<\/td>\n1,500<\/td>\n2,500<\/td>\n5,000<\/td>\n5,000<\/td>\n1,000<\/td>\n1,500<\/td>\n1,500<\/td>\n2,500<\/td>\n4,000<\/td>\n5,000<\/td>\n15,000<\/td>\n1,000<\/td>\n<\/tr>\n
Max. Neck Diameter (mm)<\/td>\n98<\/td>\n110<\/td>\n110<\/td>\n138<\/td>\n100<\/td>\n50<\/td>\n100<\/td>\n110<\/td>\n110<\/td>\n138<\/td>\n168<\/td>\n40<\/td>\n<\/tr>\n
Max. Container Diameter (mm)<\/td>\n110<\/td>\n130<\/td>\n170<\/td>\n190<\/td>\n110<\/td>\n110<\/td>\n110<\/td>\n130<\/td>\n130<\/td>\n180<\/td>\n240<\/td>\n94<\/td>\n<\/tr>\n
Max. Container Height (mm)<\/td>\n250<\/td>\n250<\/td>\n330<\/td>\n330<\/td>\n250<\/td>\n250<\/td>\n250<\/td>\n300<\/td>\n300<\/td>\n350<\/td>\n450<\/td>\n250<\/td>\n<\/tr>\n
Theoretical Output (bph)<\/td>\n700<\/td>\n700<\/td>\n600<\/td>\n600<\/td>\n700<\/td>\n1,000<\/td>\n1,000<\/td>\n1,800<\/td>\n800<\/td>\n1,600<\/td>\n900<\/td>\n2,800<\/td>\n<\/tr>\n

<\/p>\n

Electrical System<\/td>\n<\/tr>\n
Max. Heating Power (kW)<\/td>\n16<\/td>\n12<\/td>\n24<\/td>\n36<\/td>\n66<\/td>\n45<\/td>\n69<\/td>\n42.5<\/td>\n48<\/td>\n85<\/td>\n68<\/td>\n64<\/td>\n<\/tr>\n
Normal Heating Power (kW)<\/td>\n10<\/td>\n10<\/td>\n12<\/td>\n14<\/td>\n38<\/td>\n13\u201315<\/td>\n40\u201342<\/td>\n18<\/td>\n22<\/td>\n35<\/td>\n35<\/td>\n30<\/td>\n<\/tr>\n

<\/p>\n

Air System<\/td>\n<\/tr>\n
Operating Pressure (kg\/cm\u00b2)<\/td>\n7 (all models)<\/td>\n<\/tr>\n
Blowing Pressure (kg\/cm\u00b2)<\/td>\n35<\/td>\n35<\/td>\n30<\/td>\n30<\/td>\n30<\/td>\n35<\/td>\n35<\/td>\n26\u201335<\/td>\n35<\/td>\n30<\/td>\n35<\/td>\n35<\/td>\n<\/tr>\n
High-Pressure Air (ltr\/min)<\/td>\n1,200<\/td>\n2,000<\/td>\n3,500<\/td>\n3,500<\/td>\n1,000<\/td>\n1,500<\/td>\n1,200<\/td>\n1,000\u20131,500<\/td>\n1,200<\/td>\n6,000<\/td>\n16,000<\/td>\n3,000<\/td>\n<\/tr>\n

<\/p>\n

Cooling Water<\/td>\n<\/tr>\n
Temperature (\u00b0C)<\/td>\n8\u201310<\/td>\n8\u201312<\/td>\n8\u201312<\/td>\n8\u201312<\/td>\n8\u201310<\/td>\n8\u201310<\/td>\n8\u201310<\/td>\n8\u201310<\/td>\n8\u201310<\/td>\n8\u201312<\/td>\n8\u201310<\/td>\n8\u201310<\/td>\n<\/tr>\n
Flow Rate (ltr\/min)<\/td>\n30<\/td>\n30<\/td>\n30<\/td>\n30<\/td>\n30<\/td>\n30<\/td>\n30<\/td>\n30<\/td>\n30<\/td>\n91.4<\/td>\n50<\/td>\n60<\/td>\n<\/tr>\n

<\/p>\n

Machine Dimensions<\/td>\n<\/tr>\n
Size L\u00d7W\u00d7H (mm)<\/td>\n3160\u00d71500\u00d71800<\/td>\n3100\u00d71450\u00d71800<\/td>\n3510\u00d71830\u00d72000<\/td>\n4200\u00d72070\u00d72000<\/td>\n4510\u00d71800\u00d72050<\/td>\n2520\u00d71635\u00d71950<\/td>\n3820\u00d71940(2800)\u00d71880<\/td>\n4290\u00d71800\u00d72220<\/td>\n3250\u00d71700\u00d71810<\/td>\n4300\u00d72100\u00d72500<\/td>\n5570\u00d72090\u00d72500<\/td>\n6010\u00d72150\u00d72130<\/td>\n<\/tr>\n
Machine Weight (kg)<\/td>\n2,000<\/td>\n2,500<\/td>\n2,800<\/td>\n3,200<\/td>\n4,000<\/td>\n2,500<\/td>\n4,000<\/td>\n3,500<\/td>\n3,500<\/td>\n4,500<\/td>\n7,500<\/td>\n6,500<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Gold-highlighted columns = PP \/ PPSU \/ Tritan high-temperature material models \u00b7 All models: 7 kg\/cm\u00b2 operating pressure \u00b7 Cooling water 5\u20136 kg\/cm\u00b2<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n

Material Selection for Baby Bottles, PP Containers, and Special-Shaped Craft Bottles<\/h2>\n

PP blow molding machine material compatibility \u00b7 BPA-free baby bottle material \u00b7 Tritan special shaped bottle resin \u00b7 PPSU feeding bottle production<\/p>\n

\n
\n
\n

PP<\/p>\n

BABY-SAFE<\/span><\/p>\n<\/div>\n

\n

Polypropylene is the most widely used material for baby feeding bottles globally \u2014 microwave-safe, heat-resistant to 120\u00b0C, free from BPA, and approved under FDA 21 CFR 177.1520 for food contact. PP processes at 160\u2013170\u00b0C melt temperature, which requires barrel and screw configurations tuned for higher-viscosity melt flow compared to PET. The HGA.P models in this series are specifically configured for PP processing.<\/p>\n

Microwave safe<\/span>
\n120\u00b0C heat resistance<\/span>
\nFDA food contact<\/span><\/div>\n<\/div>\n<\/div>\n
\n
\n

Tritan (Copolyester)<\/p>\n

0% BPA<\/span><\/p>\n<\/div>\n

\n

Tritan from Eastman Chemical is the premium BPA-free choice for sippy cups, children’s water bottles, and reusable sports bottles. It offers glass-like clarity, dishwasher resistance (top rack, repeated cycles), and impact strength well above standard PET. Processing temperature runs 260\u2013290\u00b0C \u2014 higher than PP or PET \u2014 and the material is particularly well-suited to special-shaped containers because it flows precisely into complex mould geometries with minimal distortion.<\/p>\n

Dishwasher-proof<\/span>
\nGlass clarity<\/span>
\nComplex geometry<\/span><\/div>\n<\/div>\n<\/div>\n
\n
\n

PPSU<\/p>\n

PREMIUM<\/span><\/p>\n<\/div>\n

\n

Polyphenylsulfone is the material of choice for the premium end of the baby bottle market \u2014 amber-tinted, autoclavable at 134\u00b0C, and completely free from BPA, BPS, and phthalates. PPSU processes at 340\u2013380\u00b0C and requires specialised high-temperature barrel insulation and screw alloys. Bottles produced from PPSU carry a significant price premium in retail, making even low-cavity output (700\u20131,000 bph on FS-series models) commercially viable.<\/p>\n

Autoclavable 134\u00b0C<\/span>
\nZero BPA\/BPS<\/span>
\nPremium market<\/span><\/div>\n<\/div>\n<\/div>\n
\n
\n

PETG \/ PC<\/p>\n

CRAFT & DECO<\/span><\/p>\n<\/div>\n

\n

For craft bottles, decorative flacons, and artistic special-shaped containers, PETG is the go-to material \u2014 easier to process than standard PET, sharper detail retention in faceted or embossed surfaces, and better impact resistance without the brittleness of pure PET. PC (polycarbonate) delivers optical-grade clarity for display-quality bottles. Both materials suit the HGA.FS and HGA.ES models in this series for small-volume, high-value decorative container production.<\/p>\n

Sharp surface detail<\/span>
\nFaceted geometry<\/span>
\nDisplay clarity<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n

What Makes This ISBM Machine Series the Right Choice for Baby Bottle and Special-Shaped Container Production<\/h2>\n

PP baby feeding bottle ISBM machine features \u00b7 special shaped bottle blow molding precision \u00b7 BPA-free bottle production machine \u00b7 craft bottle mould machine single stage<\/p>\n

\n
\n
1<\/div>\n
\n

The HGA.P Models Have Barrel Configurations Specifically for PP and High-Temperature Resins<\/p>\n

Standard ISBM machines are tuned for PET, which melts at around 260\u00b0C. PP runs at 160\u2013170\u00b0C but behaves very differently \u2014 it’s more viscous, it cools faster, and it needs more consistent conditioning to blow evenly without cold spots. The HGA.P models in this series use extended conditioning dwell times and independently controlled heating zones to manage PP’s narrower processing window. The same applies to PPSU, which processes at 340\u2013380\u00b0C and needs high-temperature barrel alloys that standard PET machines can’t handle without degrading the material.<\/p>\n<\/div>\n<\/div>\n

\n
2<\/div>\n
\n

Closed Single-Stage Cycle Keeps Baby Bottle Interiors Contamination-Free Without Extra Cleaning Steps<\/p>\n

In a two-stage process, preforms are stored in open hoppers, transported on conveyors, and fed into a second machine \u2014 every one of those steps is an opportunity for dust, particulate, or microbial contamination to enter the bottle cavity. For infant feeding bottles, that’s not an acceptable risk. The ISBM single-stage cycle goes from resin pellet to finished bottle entirely within the machine, with no preform leaving the controlled environment between injection and blow moulding. The interior surface of every bottle is inherently clean on ejection \u2014 which simplifies your quality validation considerably if you’re supplying to retail with infant safety claims.<\/p>\n<\/div>\n<\/div>\n

\n
3<\/div>\n
\n

Special-Shaped Bottles Depend on Preform Temperature Uniformity \u2014 This Is Where Two-Stage Processes Fail<\/p>\n

Faceted perfume flacons, flat oval craft bottles, multi-sided decorative containers \u2014 these shapes require the preform to be at precisely the right temperature across its entire wall before blowing begins. If any zone is 5\u20138\u00b0C hotter than the surrounding area, that zone will blow out faster, creating a thin wall section in the final bottle that distorts the intended surface geometry. In a reheat two-stage process, this temperature variation is introduced by uneven infrared lamp heating during the preform reheating stage. ISBM avoids this entirely because the preform goes directly from injection into the conditioning station while it still holds uniform heat from the injection cycle \u2014 far less variation to manage.<\/p>\n<\/div>\n<\/div>\n

\n
4<\/div>\n
\n

JS-4C114 at 2,800 BPH \u2014 When You Need Volume Without Sacrificing PP Precision<\/p>\n

The HGA.JS-4C114 is the highest-output model in this series at 2,800 bottles per hour, running 4 cavities on containers up to 1,000 ml with a 40 mm neck. At 64 kW installed power and 30 kW normal operating power, it’s built for PP bottle production at scale \u2014 the kind of daily output (around 56,000 bottles per 20-hour shift) that a mid-size personal care or baby product manufacturer actually needs. The 40 mm neck covers standard baby bottle closure formats and most sport bottle cap fitments.<\/p>\n<\/div>\n<\/div>\n

\n
5<\/div>\n
\n

Single-Cavity FS Models Are the Right Tool for Premium Low-Volume Craft and Decorative Bottle Production<\/p>\n

Not every bottle needs 2,000 BPH. Craft bottle manufacturers, artisan spirits producers, luxury personal care brands, and decorative gift packaging businesses often run SKUs at 50,000\u2013200,000 units per year \u2014 volume ranges where a single-cavity machine at 600\u2013700 BPH is perfectly adequate and dramatically more capital-efficient than a 4- or 6-cavity setup. The FS-1CG series (four single-cavity models from 1,500 ml to 5,000 ml) is designed precisely for this use case: premium, low-volume, high-complexity container production where surface quality and shape fidelity matter more than output rate.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n

What Containers Does This Series Actually Cover?<\/h2>\n

baby bottle blow molding machine applications \u00b7 PP special bottle production \u00b7 Tritan reusable bottle machine \u00b7 craft bottle ISBM \u00b7 wide-mouth baby jar machine<\/p>\n

\n
\n

Baby & Infant Care<\/p>\n

    \n
  • Standard 150ml\u2013300ml PP feeding bottles (narrow neck, NUK\/Avent formats)<\/li>\n
  • Wide-neck PP nursing bottles (60mm+ neck, natural latch designs)<\/li>\n
  • PPSU amber premium feeding bottles (autoclave-safe, EN 14350 compliant)<\/li>\n
  • Tritan sippy cups with integrated spout or handle geometry<\/li>\n
  • Baby food storage jars (PP, wide-mouth, BPA-free)<\/li>\n
  • Breast milk storage bottles (PP, graduated markings mould-in)<\/li>\n<\/ul>\n<\/div>\n
    \n

    Sport & Reusable<\/p>\n

      \n
    • Tritan sports water bottles (500ml\u20131L, dishwasher-safe)<\/li>\n
    • PP gym and cycling hydration bottles (wide-mouth, squeeze-body)<\/li>\n
    • Children’s school water bottles (Tritan, drop-resistant)<\/li>\n
    • Toddler training cups (PP\/Tritan, ergonomic grip geometry)<\/li>\n
    • Protein shake bottles (wide-mouth, shaker ball compatible, 700ml\u20131L)<\/li>\n<\/ul>\n<\/div>\n
      \n

      Craft & Decorative<\/p>\n